|
|
Build Your Online Product Catalogs?
| Product Name: |
2K Polyester PUTTY
|
| Supply Ability: |
|
| Related proudcts |
|
| Specifications |
2K |
| Price Term: |
|
| Port of loading: |
|
| Minimum Order |
|
| Unit Price: |
|
|
802# Auto Repair Exclusive Polyester Putty
Ingredients:
Unsaturated polyesters resins, styrene, titanium dioxide, stuffing, anti sediment agent, Cobalt bis (2-ethylhexanoate) auxiliary agent and catalyst mixing ratio 100:2 ~ 3.
Applications:
It is mainly being applied to the leveling up and decoration of the blemishes, such as the drop pits of keelsons, pin-shaped cavities, crackles, little welding lines etc., before closing the floating coat in the painting techniques of passenger car to satisfy the leveling and smoothness of the keelsons before painting the surface. It is also of good tooling ability for glass reinforced plastics.
Technical Data Sheet:
Item Standard
Outward appearance Light grey, no gel, no solid, no machinery impurity.
Storage at high temperature£¨80 deg. C., 24h) No nugget or machinery impurity when temperature downs to room temperature.
Consistency, cm 8 to 13
Gelling time (23-27 deg. C.),min 2 to 11
Scratching performance Gentle resistance, not be cri***te.
Putty appearance Flat, smooth, average color, no crackle, a little of bubbling and sand holes are allowed.
Water finishing (20min to 1h30min) Easy to make slurry, does not adhere to sand paper, flat after polishing.
Dry finishing (40min to 5h) Easy to make powder, does not adhere to sand paper, flat after polishing.
I***ct Strength, cm 25 min
Pliability 50 max
Adhesive force, grade 2 max
Reference for construction:
&©|61548; Remove rust, oil, dirt, old film, water, etc. from surface completely by sander and solvent.
&©|61548; Standard mixing ratio of Base and Hardener is: Base/Hardener= 100:2 (by weight)
&©|61548; Knead Base and Hardener thoroughly to make the color of mixture uniform.
&©|61548; After complete mixing, apply the mixture within pot life (7~10 min)
&©|61548; Pot life changes depending on temperature and humidity.
&©|61548; Apply the mixture rubbing down fully with ***tula to avoid bubbling.
&©|61548; Sanding shall be made after complete dying (for more than 1 hour at 20 deg. C.).
&©|61548; In h |
| Company: |
Luce International Limited
|
| Contact: |
Ms. Wendy Lu |
| Address: |
Dongsha Development Area, South Town, He Tang |
| Postcode: |
529000 |
| Tel: |
86-750-3736565 |
| Fax: |
86-750-3736196 |
| E-mail: |
|
|
|
|
Home
